Marking gauges have been around for centuries but nothing has been designed to dial in your exact measurements, until now. 

Once again JessEm has taken a basic tool and made it innovative by enabling a marking gauge to be preset to any pre-determined position.

Machined out of high quality stainless steel, 6061 aluminum and anodized for durability. The wood sabre design allows for even pressure and control from 0 up to 6". 

The beveled blade is made up of A2 tool steel hardened to 60 RC and retracts below the reference face when not in use. The large stainless steel reference face is just under 3" wide and sits 3/4" below the blade allowing you to slide effortlessly across the stock.

The innovation of this product comes from the fine micro adjuster. The main shaft is laser engraved at every 1/2" and through the detents on the main shaft, you can quickly change the settings in 1/2" increments. The fine adjustment is at 1/16" of an inch per revolution and the graduated collar allows you to adjust down to 1/256th of an inch. The site window, on the face of the gauge, is referenced at 1/16th of an inch and allows you to know the setting of your blade. Once you have your desired position, simply lock the stainless steel knob and begin your work. 

When scribing lines for mortises, the Wood Sabre can be quickly re-adjusted for a second line. Before the JessEm Wood Sabre ships, the blade is honed and calibrated for accuracy at our Canadian manufacturing facility.

WARNING - Cancer and reproductive harm. For more information please click: JessEm Prop65 Warnings or www.P65Warnings.ca.gov

JessEm Tool Company is proud to finally introduce our Metric Wood Sabre Marking Gauge. 

Machined out of high quality stainless steel, 6061 aluminum and anodized for durability. The wood sabre design allows the user to dial in their scribe line from 0 up to 150mm.

The beveled blade is made up of A2 tool steel hardened to 60 RC and retracts below the reference face when not in use. The large stainless steel reference face is just under 75mm wide and sits 19mm below the blade allowing you to slide effortlessly across the stock.

The innovation of this product comes from the fine micro adjuster. The main shaft is laser engraved at every 10mm and through the detents on the main shaft, you can quickly change the settings in 10mm increments. The fine adjustment is at 2mm per revolution and the graduated collar allows you to adjust down to 0.1mm. The site window, on the face of the gauge, is referenced every 2mm and allows you to know the setting of your blade. Once you have your desired position, simply lock the stainless steel knob and begin your work.

When scribing lines for mortises, the Wood Sabre can be quickly re-adjusted for a second line. Before the JessEm Wood Sabre ships, the blade is honed and calibrated for accuracy at our Canadian manufacturing facility.

WARNING - Cancer and reproductive harm. For more information please click: JessEm Prop65 Warnings or www.P65Warnings.ca.gov

** Please make sure you have Adobe Acrobat or Reader Downloaded in order to view. Click on the .PDF icon below and a separate window will open. Click on the white box that appears and then click on the save icon in the top right hand corner. Once the saved version is on your computer, double click and it will open in Adobe on your computer. Click on trust this document and then click on the white box. You will be able to look and interact with a 3D version of the product.