Mast R Lift Excel II™
Model# 02202
  • 100% fully CNC Machined at our manufacturing facility

  • 11 Double Sealed Bearings throughout allows for smooth operations

  • Raise and lower with ease

  • Shafts pressed into mounts to spread the lateral load of the router

  • Wear components are anodized for appearance and corrosion resistance!

  • Dedicated locking mechanism for heavy duty long term routing

  • No Dedicated router: Designed to fit a variety of fixed based routers on the market.

  • Bit changes easily done above the table
Product Description
Compatible Router Motors

The mast-R-Lift Excel II is our top of the line table Router Table. There are many great features added to this excel that our customers wanted.We added double sealed bearings to the lift Spindle, 6 double sealed bearings to the height adjustment mechanism (actuated through 2 gear boxes) and 3 double sealed bearings to the Cam Lock. This will provide you with a lifetime of use for your lift, even with the heaviest routers on the market, your Excel II will be able to raise and lower with ease.

All of JessEm’s Lifts have the patented feature of adding tension to the threaded spindle which will remove any backlash but still adding some resistance to the rotation of the thread. This removed any vibration from the thread clearance and also prevented the spindle from moving and changing your setting while routing. This feature is included on our Mast-R-Lift Excel II. We wanted to go one step further with the Excel II, so we added a dedicated locking mechanism for heavy duty long term routing operations. Now, not only do you have the patented tensioning feature but we also have added a cam lock that is accessible from the the same location as the crank handle. A simple twist ensures your Excell II is locked securely in place, giving you more confidence that the height is set and locked in place.

The shafts on the Mast-R-Lift Excel II like all our Router Lifts are pressed into a shaft mount with hydraulic pressure. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. All the machined components on the Mast-R-Lift Excel II are machined on one of our CNC mills at our Oro-Medonte, Ontario, Canada location. All the aluminum non wear components on the Lift are anodized for appearance, corrosion resistance and some wear resistance.

Porter Cable 7518 (4.2” Motor Dia.)

Porter Cable 690/890 (3.5” Motor Dia.)

Bosch 1617/1618 (3.5” Motor Dia.)

DeWalt 610/618/616 (3.5” Motor Dia.)

Makita 1101 (3.218” Motor Dia.)

Hitachi M12VC & KM12VC (3.267” Motor Dia.)

Milwaukee 5625/5626 (4.143” Motor Dia.)

Milwaukee 5615/5616/5619 (3.32” Motor Dia.)

Craftsman 17543/17540/28190 (3.5” Motor Dia.)

Rigid R29302 (3.625” Motor Dia.)

Related Products