Nothing on the market can provide you with the safety and precision while holding your stock and preventing kickback without certain limitations. The unique guide rollers are mounted on a 5-degree angle effectively steering your stock towards the fence. To help prevent kickback, each roller is mounted on a on way needle roller bearing.
The roller arm holds your work under spring pressure to ensure your work is held firmly in place. The arm causes the roller to hold with more force if the wood tries to move against the direction of the feed.
Set up is fast and easy. The stock guides can also pivot out of the way and tuck behind the surface of your fence when not in use.
With Clear-Cut TS™ Stock Guides you wont have to struggle to hold wide boards or large panels as you try to feed it through your saw blade. The guides pull your stock securely into position and hold your work tight to the fence. You will achieve safer, smoother and more precise cuts as your work is always held in position.
Clear-Cut TS™ Stock Guides mount to most commercially available table saw fences and with the use of our T-track you have complete adjustability of your stock guides. The guides have 3-1/8” of total vertical travel and can accommodate a maximum stock thickness 13/16” above the mounting surface when mounted with the T-track.
Clear-Cut TS™ Stock Guides are CNC machined from solid aluminum and anodized for appearance and durability. The roller axes are CNC machined from cold rolled steel and case hardened for durability. The bar and spring retainer is machined from stainless steel for corrosion resistance. The rollers are CNC machined from wear resistant acetyl resin, which also has low coefficient of friction. The traction tires are moulded out of urethane for long life and superior grip on your stock.
With JessEms’ Clear-Cut TS™ Stock Guides, set up is fast and easy. They are locked in their position along the fence with 2 knurled knobs. The height distance to the fence